BETCO® ONE COAT

Urethane Gloss Finish for Wood Gym Floors

Betco ONE COAT is designed for maximum film build in a one coat procedure. It saves labor time and materials by achieving a deep shine with a single coat. Formulated with excellent leveling properties for easy application that enhances the natural beauty of wood. Less than 450 grams/liter VOC. The perfect finish for a screen and recoat application.

Features

Excellent flow and leveling.

Extended protection and durability.

High gloss/high solids

One coat application.

Tech Specs
Color Light amber
Coverage 400-450 sq. ft/gal
Dry time 18-24 hrs.
Shelf life 1 year
Solids 50% +/-
VOC Less than 450 grams/liter
Directions for Use

Recommended for use in finish all types of floors (gymnasium, sports floors, maple and oak). FOR NEW OR SANDED floors: NOTE: Always use a respirator when apply this product. Sand the floors or use accepted NWFA or MFMA procedures. All finish must be removed. Finish sand with 100 or 120 grit screens. Vacuum all dust and the floors or with dry cotton towels. Repeat if necessary. 4. Apply 2 coats of a penetration sealer. Recommended application procedures for penetration sealer. 5. screen seal oat(s) with 120 grit screens, vacuum and with waterless cleaner Let dry 30 - 60 minutes with ventilation before apply paint or finish. 6. Apply finish. Use a lambs applicator fi rest across the grain and then with the grain or use a gravity feed applicator apply the product with the grain of the. 7. Coats of finish are recommended. Apply at 400 - 450 sq./gal. 8. Allow to dry at least 12 hours before recoat Abrade between coats with maroon top scrub pad or used screens. 9. Let dry at least 72 hours before allow normal traffic. 10. All paints should be tested prior to use for compatibility and adhesion. PREVIOUSLY SEALED OR FINISHED floors: Floors or use cotton towels and waterless cleaner 2. screen with 100 grit screens or a maroon pad/SPP pad with the grain of the. Vacuum all dust and the floors or with cotton towels and waterless cleaner repeat if necessary. Let dry before coat 4. Apply with lambs applicator fi rest across the grain and then with the grain or use a gravity feed applicator apply the product with the grain of the. This coat an also be applied with a T-bar. 5. T coats of finish are recommended. Apply at 400 - 450 sq./gal. 6. Allow to dry at least 12 hours before recoat. Abrade between coats with a maroon top scrub pad or used screen. 7. Let dry at least 72 hours before allow normal traffic. 8. All paints should be tested prior to use for compatibility and adhesion. NOTE: Do not use on resilient tile. Use waterless cleaner for cleanup. Not recommended for floors that have been previously maintained with wax or oil.

Similar Products