GLYBET™ II FOR HEALTHCARE USE

Aerosol Disinfectant

This product delivers disinfecting and deodorizing performance in an economical ready-to-use aerosol. It is formulated for use in daily maintenance programs to disinfect and deodorize in one labor saving step. Ideal for use in the daily maintenance of restroom fixtures, hospitals, households and garbage cans. This tuberculocidal disinfectant is for use on multiple hard non-porous surfaces.

Features

Effective against antibiotic resistant strains VRE, MRSA, and CA-MRSA.

Kills Herpes Simplex Type 1 & 2, Salmonella, Pseudomonas and Staphylococcus.

No CFCs. Federal regulations prohibit the use of CFC propellants in aerosols.

Tuberculocidal Disinfectant.

Tech Specs
Appearance Clear
EPA Reg. No. 706-69-4170
Flammability Flammable
Fragrance Citrus bouquet
pH PH 9.5 - 10.5
Rinsability Excellent
Shelf life 1 year
Spray pattern Fine mist
Storage stability 120° F maximum
Weight 15.5
Directions for Use

Application Instructions
Shake well before using and occasionally while spraying. Clean surface thoroughly with an effective cleaning compound prior to treatment. Remove all gross filth or heavy soil from all surfaces to be treated.
To Disinfect and for Tuberculocidal Activity: After surface is cleaned, hold can upright 6” to 8” from surface to be treated. Spray 3-4 seconds until surface is wet. Allow to dry without wiping or allow spray to contact treated surface for a minimum of ten minutes prior to wiping. For Herpes Simplex Virus Types 1 and 2 spray 8-10 seconds until the surface is wet. Allow to dry without wiping or allow spray to contact treated surface for a minimum of ten minutes prior to wiping. Tuberculocidal in 10 minutes at 25°C.
To Control Surface Mildew: After surface is cleaned, cover surface with mist. Repeat treatment every week for effective control. For Skate, Ski and Snowboard Boots. To Deodorize and Control Mildew on Shoes and Boots: After shoe/boot surface is cleaned, hold can upright with opening pointed away from face and 6” to 8” from shoe/boot surface to be treated. Spray interior and exterior of shoe/boot for 3-5 seconds or until surface is wet. Allow shoe/boot to air dry without wiping.
Special Instructions for Cleaning and Decontamination Against HIV on Surfaces/ Objects Soiled with Blood/Body Fluids on precleaned environmental surfaces/objects previously soiled with blood/body fluids in health care settings (or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of HIV): Personal Protection: When handling items soiled with blood or body fluids, use appropriate barrier protection such as disposable latex gloves, gowns, masks or eye coverings. Cleaning Procedure: Blood and other body fluids must be thoroughly cleaned from surfaces and objects before application of this disinfectant. Contact Time: Spray surface to be treated 3-4 seconds, from a distance of 6-8 inches, until surface is wet. Allow spray to dry without wiping or allow spray to contact treated surface for a minimum of ten minutes prior to wiping. Disposal of Infectious Materials: Blood and other body fluids should be autoclaved and disposed of according to federal, state and local regulations for infectious waste disposal.

Similar Products