Defender™ Linoleum System floor finish

Structure with SRT provides superior Defense against Black Heel Marks. This high gloss low odor floor finish meets todays needs for care and maintenance of linoleum flooring. This finish responds to low to moderate burnishing and can safely be stripped off as part of the Defender Linoleum System and is perfect for use in all types of markets especially healthcare, education and retail.


Superior “Defense” Against Black Heel Marks

High Gloss

Low Maintenance

Extremely Low Odor

Extended Wear Formula

Tech Specs
Color (dried) Crystal Clear
Color (liquid) White
Coverage 2000 - 3000 Square Feet/Gallon
Dry time 30 - 40 Minutes
Fragrance Mild
Freeze Thaw Stability 3 Cycles
Gloss (ASTM D 1455-87) One Coat 80 - 85
Gloss (ASTM D 1455-87) Two Coats 90 - 95
Heel mark resistance Excellent
Leveling Excellent
pH 7.0 - 8.5
Powdering resistance Excellent
Shelf life 1 Year
Specific gravity 1.03
Directions for Use

Recommended for use on all types of Linoleum flooring and properly prepared hard surfaces.

Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Vanisher™ stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 2 coats of finish is recommended.

Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Restorer to condition the floor and extend the time between top scrub and recoating.

Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above. Please recycle empty container. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.

Similar Products