FiberPRO® CFP Carpet Protector

Carpet and Fabric Protector

FiberPro CFP extends the life of your carpet by forming an invisible barrier on the carpet or fabric to prevent spills from being absorbed into the fibers. When applied, it seals each individual fiber giving the carpet extra protection. Routine maintenance is faster because dry soils are held in suspension for easy removal by vacuum. The wicking action of the product assures uniform protection and increases the carpets ability to resist stains.


Extends the time between shampooing, eliminating unnecessary expense.

Repels dry soils and both oil and water-based spills. Dirt/stain build-up is eliminated.

Soil, stains and grit easily vacuum out.

Tech Specs
Color White opaque
Coverage 1800 square feet/gallon
Flammability Nonflammable
Fragrance Characteristic
pH 4.0 - 6.0
VOC's None
Warranty 2 years
Directions for Use

Recommended for protecting carpets from water, oil and dry soils. Test in an inconspicuous area before application. Avoid over wetting the surface.
CARPET: Apply protector solution to previously cleaned carpet. Vacuum first and then deep clean the carpet with restorative maintenance procedures. Dilute 16 oz./gal. or 125 mL/L (1:8) for wet carpet and apply at a rate of 200 sq. ft./gal. or 18.6 sq. meters/3,785 mL. Dilute 8 oz./gal. or 63 mL/L (1:16) for dry carpet and apply at a rate of 100 sq. ft/gal. or 9.3 meters/3,785 mL. Let dry 4 - 6 hours before allowing foot traffic.
FABRIC: Apply protector solution to previously cleaned fabric or upholstery. Dilute 8 oz./gal. or 63 mL/L (1:16) and apply until surface is moist. Do not over wet the material. Work solution into the material for uniform coverage and protection. If it is necessary to walk on carpet before it is completely dry, proceed with caution as a wet surface could be slippery.

Similar Products