Betco Corporation Home

Betco_Logo_2013Customer Service: 1-888-GO-BETCO
Equipment Tech Support: 1-877-856-5954
8:00AM - 5:30PM EST, Monday - Friday

LiquiShield Concrete Guard

Home > Products > LiquiShield Concrete Guard
Contact to Order Generate Technical Data Sheet
Videos

Introducing Crete Rx

Crete Rx™ LiquiShield Procedures

Available In:
4 - 1 Gal. Bottles Item #167904-00
Concrete Guard
LiquiShield, a cutting-edge, water-based protective guard designed to enhance gloss and provide robust defense against stains and etching within the Crete Rx™ ProCoat system. With its low odor and easy application, LiquiShield requires just 2-3 coats, covering 3,000 - 4,000 sq.ft. per gallon. This innovative solution eliminates the need for traditional floor finishes and coatings by effectively resisting scuffs, black marks, and soil. Unlike conventional coatings, LiquiShield won’t peel, flake, or discolor, and its breathable formula makes it the perfect choice for concrete, terrazzo, and other porous stone surfaces.
Features

Easy Application

Low odor

Superior resistance

Durable & reliable

Tech Specs
Color Opaque White
Density 1.025-1.05
pH 7.0-9.0
Flash Point >100C/212F
Warranty 1 year
Directions for Use

Recommended for concrete and terrazzo surfaces for extended stain and etch protection. Clean entire area with Betco floor cleaner, allow floor to dry prior to application. Apply Betco LiquiShield at proper application rate, 3,000 - 4,000 sq. ft. per gal, with a flat finish microfiber applicator pad. Allow to dry to touch, plus 30 minutes, then burnish the floor with a Hair Lite pad, then apply second and optional third coat using the same procedures. Allow final coat to dry then high speed burnish with Hair Lite Pad. Allow 1 to 2 hours cure time before floor is exposed to full traffic. Allow 24 hours before the use of cleaners on the floor.

SDS and Resources
Similar Products
X