Customer Service: 1-888-GO-BETCO Equipment Tech Support: 1-877-856-5954 8:00AM - 5:30PM EST, Monday - Friday
Introducing Crete Rx
Honing & Polishing: Interim Maintenance
Honing & Polishing: Stain & Etch Remediation
Honing & Polishing: Restorative Maintenance
Penetrating polymers seal off open pores
Resists staining and etching
Interacts with Sealant Infused Polymers
Creates uniform, continuous protective surface
Clean entire area with Betco Crete Rx Densiclean, allow floor to dry prior to application. Apply Betco Stain Defense at proper application rate, 3500 to 4000 sq.ft./gal, with a low-pressure sprayer spread with a microfiber applicator or mop and bucket application. Allow dry to touch for 30-45 minutes, then high speed burnish with Betco Crete Rx SI Burnish Pad. Allow 1-2 hours cure time before floor is exposed to full traffic.