Recommended for top scrubbing or removing multiple coats of water-based acrylic floor finish from luxury vinyl tile, rubber, sheet vinyl, linoleum and other properly prepared hard surfaces. Sweep or dust mop floor to remove any large debris. For initial top scrub or light to medium stripping, dilute 12 oz. /gal. (1:10). For heavy stripping, dilute 25 oz. /gal. (1:5) with cool water. Apply solution liberally to floor surface. Allow 10 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low speed rotary machine, automatic scrubber or stripping machine with a maroon pad or similar. Pick up solution with a wet vacuum, automatic scrubber or mop and bucket and thoroughly rinse the floor. Note: On new or factory finished floors top scrub floors with Recover and a maroon pad for best results. See product page at www.betco.com for more information. Allow floor to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue. Please recycle empty container.