Recommended for use on brick, ceramic tile, marble, grout, porcelain and quarry tile, slate, terrazzo, sand stone, limestone, concrete, quartz and travertine. All tile and stone must be
cemented and grouted following cure times per manufacturer’s directions prior to application of this penetrating sealer.
1. Floor must be fully stripped and free of all coatings, finishes, guards, waxes, and sealers.
2. Surface must be clean and completely dry before application.
3. Pour product in a thin line on the floor, then apply with a clean microfiber flat mop..
4. Spread evenly using overlapping passes.
5. Allow product to dwell 15-20 minutes, keeping wet.
6. Remove all excess with a clean, dry microfiber flat mop after product dries.
7. Allow 30 - 60 minutes dry time between coats.
8. Apply a minimum of two coats for optimal protection.
9. Allow final coat to cure befroe light traffic (light traffic 1-2 hours, full cure: up to 24 hours).,br>